1.What is a SAN Copy supported session type? 2.When entering a Navisphere CLI command, which variable specifies the CXSeries Processor that will accept the command? [ip address of storage processor] 4.How is the MirrorView Fracture Log configured? A.Bind at least one unused LUN B.Make sure LUNs are at least 128MB C.The Fracture Log is automatically configured D.Allocate SP Memory in the Memory tab of the Primary Storage System 5.How does a SnapView Snapshot maintain a "pointintime" A.Creating a virtual copy of the LUN and by using the COFW mechanism. B.Copying the changed data of the source LUN to the SP Write Intent Log. C.Copying incremental data at the start of the Snapshot session to the Snapshot cache. D.Copying all source LUN data, at the start of the Snapshot session, to the Snapshot cache. 6.What must occur before the write operation is acknowledged to the host in normal MirrorView A.Link status must be checked B.Fracture Log must be updated C.Write is acknowledged on secondary array D.Write Intent Log must be enabled for the Primary LUN 7.Where is the user notification information for Event Monitor stored? 8.Which three [3] options can be configured in the reate RAID Group?dialogue box? 9.Which three [3] options are available to connect and configure a switch? 10.At which level do you set the CLARiiON cache page size? C.For read cache per Storage Processor D.For write cache per Storage Processor |