下沙论坛

 找回密码
 注册论坛(EC通行证)

用新浪微博连接

一步搞定

QQ登录

QQ登录

下沙大学生网QQ群8(千人群)
群号:6490324 ,验证:下沙大学生网。
用手机发布本地信息严禁群发,各种宣传贴请发表在下沙信息版块有问必答,欢迎提问 提升会员等级,助你宣传
新会员必读 大学生的论坛下沙新生必读下沙币获得方法及使用
查看: 2993|回复: 0
打印 上一主题 下一主题

testpassport E20-590 题库

[复制链接]
头像被屏蔽

该用户从未签到

跳转到指定楼层
1
发表于 2009-6-25 09:36:42 | 只看该作者 回帖奖励 |倒序浏览 |阅读模式
Legato Cert E20-590 试题库由资深IT认证讲师和 Legato Cert 产品专家结合 PROMETRIC VUE 的真实考试环境最新原题倾心打造.0 }1 ]' R: p8 {) i# Z5 W
最新E20-590
1. You designed a customer solution using a disk device for backups. The available disk space is limited.
You determined that it is necessary to move data from disk to tape after a specified time.
What should you use?
A.Advanced file type device with cloning
B.Advanced file type device with staging
C.File type device and nsrcompress
D.File type device with archiving
Answer: B
2. You designed a customer solution using a disk device for backups. The available disk space is limited.
You determined that it is necessary to move data from disk to tape after a specified time.
What should you use?
A.Advanced file type device with cloning
B.Advanced file type device with staging
C.File type device and nsrcompress
D.File type device with archiving
Answer: B
3. In an EMC Disk Library (EDL) environment, what describes the autoarchive
feature?
A.Backup application issues clone command; EDL copies save sets to physical tape with a different
barcode
B.Backup application issues clone command; EDL copies save sets to physical tape with the same
barcode
C.Backup application issues eject command; EDL moves backup data to physical tape with a different
barcode
D.Backup application issues eject command; EDL moves backup data to physical tape with the same
barcode
Answer: D
4. A customer has a DMX3
system with available low cost Fiber Channel storage and wants to use it as a
backuptodisk
destination storage device. Some of the storage nodes in the network are not connected
to the SAN.
Which solution can be used so that all storage nodes in the environment use the DMX3
as the
backuptodisk
destination device while leveraging their current investment?
A.CX80G
B.DL210
C.NS80
D.NS80G
Answer: D
5. A customer wants to expand an existing Symmetrix DMX3
production system for use with
backuptodisk.
What do you recommend?
A.Add ATA disks
B.Dedicate a quadrant to backup
C.Use Fibre Channel disks only
D.Use RAID 3 with the backup LUNs
Answer: B
6. A customer has a DL4100. What is required to activate the embedded storage node?
A.Add the embedded storage node license through the EMC Disk Library GUI
B.Log in to the disk library and install the EMC NetWorker storage node
C.Log in to the disk library and run the enable_esn.sh script
D.Use the command line interface to enable the embedded storage node option
Answer: A
7. A customer is concerned about nonintentional
SCSI resets destroying backups in their EMC
NetWorker environment. Which EMC NetWorker feature should be configured?
A.Auto Media Verify
B.Eject Sleep
C.Idle Device Timeout
D.Port Polling Period
Answer: A
8. You are designing a backup solution for an EMC NetWorker customer who wants to backup while
restoring from the same device. Which option should be used?
A.Advanced file type device
B.File type device
C.Save set cloning
D.Save set staging
Answer: A
9. A customer needs to configure backup for a large database (~ 1 TB) with EMC NetWorker Module for
Oracle. Which solution will minimize performance degradation on the database server?
A.Backuptotape
B.Backuptodisk
C.Backuptovirtual
tape library
D.Backup with splitmirror
function
Answer: D
10. A customer has the following backup requirements:
Must meet short backup window
Must meet low RTO
Must backup many highly transactional Oracle databases
Must eliminate tape
The customer has two data center sites with ample bandwidth between them but needs to limit utilization
as much as possible. Which solution best addresses the customer's requirements?
A.A pair of EMC DL3D 3000 at two different sites with replication implemented between them
B.A pair of EMC DL4000 series at two different sites with replication implemented between them
C.A pair of EMC DL4000 series with 3D4000 at two different sites with replication implemented between
them
D.A pair of EMC DL4000 series with 3D4000 at two different sites with MirrorView implemented between
them
Answer: C
分享到:  QQ好友和群QQ好友和群 QQ空间QQ空间 腾讯微博腾讯微博 腾讯朋友腾讯朋友
收藏收藏 分享分享 顶 踩 转发到微博

本版积分规则

关闭

下沙大学生网推荐上一条 /1 下一条

快速回复 返回顶部 返回列表